How to build a simple bookshelf

A basic bookshelf is a great first woodworking project. It teaches measuring, cutting square and assembling a box, and you end up with something useful. This plan is for a simple open bookcase about 72 inches tall, 30 inches wide and 11 inches deep, built from standard 1×12 boards.

Materials

  • Five 1×12 boards, 8 ft long (pine is cheap and easy to work; poplar is stiffer). A 1×12 actually measures about 3/4 x 11-1/4 inches.
  • A sheet of 1/4-inch plywood or hardboard for the back.
  • Wood glue, 1-1/4 and 2-inch wood screws, finish nails.
  • Sandpaper, primer and paint, or stain and a clear finish.

Tools: tape measure, square, circular saw or miter saw, drill/driver, clamps.

How to build a simple bookshelf
Credit : whatcanu.com

Cutting list

  • 2 sides at 72 inches
  • 1 top and 1 bottom at 28-1/2 inches (the width minus the two sides)
  • 3 or 4 shelves at 28-1/2 inches

Assembly

  1. Mark the shelf positions on the inside of both sides at the same heights. Leave at least 11 inches between shelves for standard books, 13 or more for large books.
  2. Drill pilot holes, then attach the top and bottom between the sides with glue and screws. Check that the box is square by measuring the diagonals: they should be equal.
  3. Install fixed shelves the same way, or drill a row of holes and use shelf pins for adjustable ones.
  4. Square the frame, then nail or screw the back panel on. The back is what stops the bookcase from racking sideways.
  5. Fill screw holes, sand, and finish.
How to build a simple bookshelf
Credit : whatcanu.com

Avoid sagging shelves

Books are heavy. A 3/4-inch pine shelf longer than about 30 to 32 inches will sag over time. Keep spans short, use a stiffer wood, or glue a 1×2 strip along the front edge of each shelf: it looks neat and adds a lot of stiffness.

Anchor it to the wall

A tall bookcase can tip over, especially if a child climbs it. The US Consumer Product Safety Commission’s Anchor It! campaign explains how to secure furniture with anti-tip straps or brackets screwed into a wall stud.

Next steps

Once you are comfortable with this project, you can adapt it into built-in shelves or a window seat. To arrange the finished shelves, see how to create a cozy reading nook, and for more storage ideas, the best ways to add storage space.

Leave a Comment